Cantera/Integral and Differential Reactors

(Why integral vs. differential is useful/important)

Main difference between integral and differential reactors is in the assumptions about what's going on inside the reactor control volume. This changes the form of equations being solved.

A Word on Distributions and Gradients

Really, ultimately, the difference between integral and differential reactors is all about gradients. Whether you resolve them, or integrate over them; whether you ignore them, or treat them rigorously; not just which directions the gradients are in, but also which quantities the gradients are for.

And ultimately, gradients are all about distributions. How does the distribution of thermodynamic states, the distribution of temperatures, the distribution of species concentrations, inside of a particular reactor, look?

Fogler, for example, talks about residence time distributions: reactors in which different fluid packets spend different amounts of time.

To model a reactor with a wide range of residence times, a differential reactor model would create a set of differential reactors, with each differential reactor being assigned its own residence time. This would approximate the distribution with a set of finite bins, equal to the number of different reactors. An integral reactor, on the other hand, would average all the residence times of all the fluid packets, and model the entire reactor with a single integral reactor, with a single mean residence time. This is equivalent to integrating the entire distribution of residence times to arrive at a mean residence time.

The differential reactor model is more expensive - we're solving N reactor equations, instead of 1 - but resolves gradients.

The integral reactor model is cheaper - we only need to solve 1 reactor equation - but it smears out all gradients smaller than the integral reactor.

Integral Reactors

Integral reactors: effects are integrated, conditions are wide, changing

Integral reactors may be isothermal - simply having an isothermal temperature profile does not mean a reactor is differential

Essentally an integral reactor is characterized by having gradients, or changes, in its thermodynamic state throughout the reactor volume. This necessitates either integrating over the multiple different zones of the reactor, each of which has a different temperature, pressure, composition, reaction rate, etc., or modeling the reactor as multiple interacting zones.

Differential Reactors

Differential reactors are the differential control volumes over which material/energy balances are written when deriving from, e.g., Reynolds Transport Theorem.

These are small enough, relative to the gradients in the system, that the control volume can be assumed to be perfectly uniform over the entire control volume.

In a differential chemical reactor, then, the entire reactor could be described with a single thermodynamic state - a single temperature, pressure, and composition - and thus have a single reaction rate, a single kinetic rate coefficient, and so on.

Thus, (real) differential reactors are useful for measuring kinetic rate data. (See Froment Bischoff book on reactor design for more details.)

Cantera's Temporal Approach

Differential/integral reactor definitions fit into how Cantera is solving equations

• Single Cantera reactor with a single control volume over a single timestep is a differential reactor
• Shrinking differential element size (timestep) to be tinier and tinier
• assuming spatial step is not differential, because assuming perfect spatial mixing, so no variance, so no difference (integral over constant function is linear func)