August 2016/Pi Thing

From charlesreid1

Revision as of 01:42, 14 August 2016 by Admin (talk | contribs) (Created page with "=Summary: Where We Are At= Pi thing, building out capability: * Starting with cameras * Later, will add microphone, weather sensors, antennas, motors, etc. Hardware: * Raspb...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Summary: Where We Are At

Pi thing, building out capability:

  • Starting with cameras
  • Later, will add microphone, weather sensors, antennas, motors, etc.

Hardware:

  • Raspberry pi 3 plain board
  • Raspberry pi 3 enclosure
  • camera and camera enclosure

Cameras:

  • Pi camera and enclosure: best option right now. Need better maneuverability.

Security:

  • Local network VPN

Procedure

Pi Setup

Used this page: Kali_Raspberry_Pi/Installing

Installed an arm image of Kali Linux onto the Raspberry Pi.

Pi Camera Setup

I connected the raspberry pi camera I had, which connects via a flat cable, to the pi camera ports on the top of the pi. The camera connection sits very loosely on the Pi 2, but on a new Pi 3, the connection is very firm. The camera is protected by a small plastic box, custom sized to fit the raspberry pi camera.

Retrieved from "https://charlesreid1.com/w/index.php?title=August_2016/Pi_Thing&oldid=12203"