Cantera Lecture

Cantera Overview

Cantera is a code written in C++ that can be used to perform chemical kinetic and thermodynamic calculations.

The way it does this is by providing the user with a set of building blocks, and allowing the user to piece these building blocks together to form complex kinetic/thermodynamic systems or networks

Users can interface with Cantera through C++, or through the other interfaces:

• Matlab toolbox
• Python
• Fortran

Cantera Objects

Reservoir - fixed state

• the state of the reservoir never changes
• used to impose fixed upstream/inlet conditions
• chemistry is frozen - so no reactions will take place

Reactor - canonical chemical reactor

• contains some mixture of species
• has a set of characteristics
• e.g. T, V, P, composition, enthalpy, density, MW, etc...

Fluids - gases or liquids

Chemical Mechanisms - external files "fed" to Cantera

• chemical mechanisms specify two things:
  • species
  • reactions
• all thermodynamic data for species is specified (e.g. heat capacity as a polynomial function - "NASA coefficients")
• all thermodynamic data for chemical reactions (pre-exponential factors, activation energies, etc.)

Walls - separate reactors

• can have heat transfer via the usual mechanisms - convection, conduction, radiation
• can have a set heating rate (a constant, or a function of time)
• can move - due to a pressure difference, a displacement rate expression, etc.)

Flow controllers - control flow... 3 types

Mass flow controller - maintains a fixed mass flowrate

Valves - the mass flowrate is a function of $ \Delta P $

Pressure flow controller - maintains a fixed $ P $ in the reactor (think of this as a pressure relief valve)

Examples

Batch Reactor Example

How might we combine the above Cantera objects to make a batch reactor?

e.g. where would the reactor go? Where would the flow controllers go?

Any reservoirs needed? No

Any flow controllers needed? No

Reactor State 1 --> Reactor State 2

We want to know what happens when the reactor is changing from state 1 to state 2

Constant volume reactor:

How to create a reactor?

What is the volume of the reactor if we don't specify it?

How do we specify a volume for the reactor?