Kali Raspberry Pi/Headless

This is a guide to connecting to a headless installation of Kali Linux on a Raspberry Pi: Kali Raspberry Pi

For general instructions on connecting to a headless Raspberry Pi, visit this page: RaspberryPi/Headless

For info/pages on Kali, visit this page: Kali

Connecting to Kali Pi

Once you've got Kali on the Raspberry Pi, now what? Well, it's pretty easy: once you boot up the Raspberry Pi, it will have a static IP address. The one we picked will let us SSH into the Pi if we have a network cable plugged into our laptop.

That's right: one end of the network cable into the laptop, the other end into the Pi:

Double Check your Pi Version

Although it's best to do this before you wait 30 minutes while your computer flashes an image to an SD card, you should probably check to make sure your Kali Pi image matches your Raspberry Pi version. Version B+ has two USB ports, and Version 2 has four USB ports.

Enabling SSH

Now we come to a question: is SSH enabled by default on Kali Linux builds for the Raspberry Pi?

Some say yes, some say no. I say, sort of.

In my experience, the Kali Linux Raspberry Pi image will start an SSH service, and it will listen on port 22, but you have to wait a while, and give it multiple tries. If at first your connection is refused, wait a little while, and try again.

Ethernet and Power Source

You should note that there may be issues with spotty connectivity if you power the Raspberry Pi from a Mini USB cable. When connected to a Mini USB cable, the Raspberry Pi can't draw enough power, and the Ethernet can sometimes be turned off.

Kali Linux Raspberry Pi: SSH: Connection Refused

This problem drove me nuts. I kept seeing an SSH error, "ssh: connect to host port 22: Connection refused" - even though the Raspberry Pi was up, online, and responding to ping.

$ ssh root@10.0.0.114
ssh: connect to host 10.0.0.114 port 22: Connection refused

$ ping 10.0.0.114
PING 10.0.0.114 (10.0.0.114): 56 data bytes
64 bytes from 10.0.0.114: icmp_seq=0 ttl=64 time=6.927 ms
64 bytes from 10.0.0.114: icmp_seq=1 ttl=64 time=6.719 ms
64 bytes from 10.0.0.114: icmp_seq=2 ttl=64 time=1.378 ms
64 bytes from 10.0.0.114: icmp_seq=3 ttl=64 time=8.679 ms

It was independent of how I set up the Pi on the network. Whether it was connected directly to the router, or directly to my computer:

$ ssh root@169.254.113.200
ssh: connect to host 169.254.113.200 port 22: Connection refused

$ ping 169.254.113.200
PING 169.254.113.200 (169.254.113.200): 56 data bytes
64 bytes from 169.254.113.200: icmp_seq=0 ttl=64 time=6.927 ms
64 bytes from 169.254.113.200: icmp_seq=1 ttl=64 time=6.719 ms
64 bytes from 169.254.113.200: icmp_seq=2 ttl=64 time=1.378 ms
64 bytes from 169.254.113.200: icmp_seq=3 ttl=64 time=8.679 ms

The headless Kali Raspberry Pi is there, and listening, but refusing our connections.

I thought this was a network issue, so I tried different network configurations. No dice.

I thought this was an issue with the SSH service, so I tried tinkering with rc2.d and init.d to verify sshd was in fact running at boot time on the headless Pi.

I tried everything. I banged my head against the wall. Then I tried plugging the Raspberry Pi into the wall, instead of plugging it directly into my computer via mini USB cable.

All the SSH problems disappeared into the aether.

The reason? When you plug the Raspberry Pi in via the mini USB cable, it needs more juice than is available, so it starts shutting things off. That means the ethernet port stops listening, and your ability to connect gets really spotty. But it's still listening - so every once and a while, you can SSH into the Raspberry Pi. (That's what makes this issue so hard to debug.)

The take-home: if you're having issues SSHing into your headless Kali Linux Raspberry Pi, don't power your Raspberry Pi via mini USB cable to USB port. Instead, power your Raspberry Pi via USB wall adapter.

This seems like an annoying limitation, but.. ok. We'll go with it.

By The Way: rc.d and init.d

In case you do want to modify the initialization process, you can load up the SD card and mount it (as described at Kali_Raspberry_Pi/Installing#How_the_Kali_Linux_Startup_SD_Card_Works).

Now you can modify files in the Linux partition, to change what starts up at different runtime levels. Debian Raspberry Pis start in runtime level 2, so anything you want to start up should go in etc/rc2.d.

Actually, what you should do is, put a service script in etc/init.d/myservice, make it executable, then create a symbolic link in etc/rc2.d.

More details here: http://raspberrywebserver.com/serveradmin/run-a-script-on-start-up.html