Latest revision as of 21:36, 16 April 2017

Summary: Where We Are At

@@ Line 1: / Line 1: @@
 =Summary: Where We Are At=
-Pi thing, building out capability:
+Stage 1 is complete: [[RaspberryPi/Weatherproof Camera Case]]
-* Starting with cameras
-* Later, will add microphone, weather sensors, antennas, motors, etc.
-Hardware:
+[[Image:FinishedPelicanMod2.jpg|500px]]
-* Raspberry pi 3 plain board
-* Raspberry pi 3 enclosure
-* camera and camera enclosure
-Cameras:
+[[Image:PelicanPacked1.jpg|500px]]
-* Pi camera and enclosure: best option right now. Need better maneuverability.
-Security:
+=Flags=
-* Local network VPN
-=Procedure=
+{{PiFlag}}
-==Pi Setup==
+[[Category:Raspberry Pi]]
+[[Category:August 2016]]
-Used this page: [[Kali_Raspberry_Pi/Installing]]
-Installed an arm image of Kali Linux onto the Raspberry Pi.
-==Pi Camera Setup==
-I connected the raspberry pi camera I had, which connects via a flat cable, to the pi camera ports on the top of the pi. The camera connection sits very loosely on the Pi 2, but on a new Pi 3, the connection is very firm. The camera is protected by a small plastic box, custom sized to fit the raspberry pi camera.
-[[Category:July 2016]]