RaspberryPi/LCD Display

Also see Arduino LCD Display, which was the original.

Overview

See Arduino LCD Display#Overview for an overview of how the LCD display works. It works by communicating with the microcontroller using I2C pins, which provide a way for integrated circuits to communicate with each other.

The Circuit

Breadboard Diagram

Need to make a firtzing diagram for this.

Breadboard Photo

Here's a photo of the breadboard:

Python Sketch

More information about the Raspberry Pi GPIO pinouts and how to control 'em with Python is over on the RaspberryPi/Blink page.

Specifically, here is some Python code written to control GPIO pins on the Raspberry Pi: RaspberryPi/Blink#The_Python_Code

The Code

Adafruit provides a whole long list of examples and Python modules for different device interfaces: https://github.com/adafruit/Adafruit_Python_CharLCD

Prep the Pi

Make sure you can log in to the Pi. This consists of the following steps:

• Mount the SD card and edit cmdline.txt, hard-code an IP address in cmdline.txt
• Unmount the SD card and insert it back into the Pi and power it up
• Give the Pi a minute to finish booting up, then connect it using an Ethernet cable to your desktop/computer
• Remotely log in to the Pi via SSH

The Python Code

Adafruit code for controlling LCDs from the Raspberry Pi: https://github.com/adafruit/Adafruit_Python_CharLCD