From charlesreid1

No edit summary
Line 18: Line 18:
=Procedure=
=Procedure=


==Pi Setup==
==Software and Setup==


Used this page: [[Kali_Raspberry_Pi/Installing]]
Reminder: used this page as guide to install: [[Kali Raspberry Pi/Installing]]


Installed an arm image of Kali Linux onto the Raspberry Pi.
Arm image of Kali


==Pi Camera Setup==
==Pi Camera Setup==


I connected the raspberry pi camera I had, which connects via a flat cable, to the pi camera ports on the top of the pi. The camera connection sits very loosely on the Pi 2, but on a new Pi 3, the connection is very firm. The camera is protected by a small plastic box, custom sized to fit the raspberry pi camera.
Page with notes?


Flat cable connection to onboard Pi camera slot was much better with the Raspberry Pi 3 than with the Raspberry Pi 2.


=Flags=
=Flags=

Revision as of 01:44, 14 August 2016

Summary: Where We Are At

Pi thing, building out capability:

  • Starting with cameras
  • Later, will add microphone, weather sensors, antennas, motors, etc.

Hardware:

  • Raspberry pi 3 plain board
  • Raspberry pi 3 enclosure
  • camera and camera enclosure

Cameras:

  • Pi camera and enclosure: best option right now. Need better maneuverability.

Security:

  • Local network VPN

Procedure

Software and Setup

Reminder: used this page as guide to install: Kali Raspberry Pi/Installing

Arm image of Kali

Pi Camera Setup

Page with notes?

Flat cable connection to onboard Pi camera slot was much better with the Raspberry Pi 3 than with the Raspberry Pi 2.

Flags